What is HI-FLOAT?

HI-FLOAT is an aqueous solution containing a special water soluble plastic.
It dries inside the latex balloon to form a barrier coating which helps hold in helium.
This coating greatly increases the floating life of the balloon.

How long will my balloons float when treated with HI-FLOAT?

When used properly, ULTRA HI-FLOAT increases the floating life of latex balloons by 25 times on average.

SUPER HI-FLOAT increases floating life by 10 times on average.

The following table shows typical floating times for various sizes of balloons:
Latex
Balloon
Size
Latex
Balloon
Type
Number of
Balloons Per
242 Helium Tank
Average
Flying Time
Helium Only*
Average
Flying Time
Helium and
SUPER HI-FLOAT
Average
Flying Time
Helium and
Ultra HI-FLOAT *
11” STANDARD COLORS 485 12-24 hrs. 4-10 days 1-4 weeks
11” METALLIC &
PEARLIZED
485 12-24 hrs. 4-7 days 1-3 weeks
14” ROUND 240 26-30 hrs. 8-14 days 2-5 weeks
16” ROUND 180 30+ hrs. 14-20 days 3-7 weeks
18” ROUND 130 36+ hrs. 16-24 days 3-8 weeks
17” HEART 268 14 hrs. 2-3 days 3-8 weeks
16” GEO DONUT® 340 22-26 hrs. 3-5 days 4-12 days
16” GEO BLOSSOM ® 400 18-24 hrs. 3-10 days 3-10 days
24” ROUND 50 2-4 days 18-30 days 4-10 weeks
3’ GIANT 15 3-5 days 4-8 weeks 6-20 weeks

* Please remember that these are estimates based on typical indoor conditions and following all of the instructions contained in this website. Flying time will be less if outdoors. Flying time varies greatly due to factors such as latex quality, humidity, temperature, altitude, etc. Balloons typically half as long in hot, humid weather. For maximum floating life, hand-tie balloons.

Is HI-FLOAT safe?

Yes. HI-FLOAT is nontoxic, non-irritating, non-corrosive, nonflammable, and biodegradable. It is very similar to the adhesive found on the back of postage stamps. Wash off the skin with water. If accidentally splashed into the eyes, flush with water for several minutes. Although it is nontoxic, it is a good idea to keep bottles away from small children.

Is HI-FLOAT toxic?

HI-FLOAT, SUPER HI-FLOAT, and ULTRA HI-FLOAT are not toxic.
They are very similar to the adhesive found on the back of postage stamps.
Although nontoxic, keep out of the reach of children.
If splashed into the eyes flush with water for several minutes.

What is the shelf life?

The shelf life of HI-FLOAT is at least a year after purchasing for unopened bottles and at least three months after the bottle is opened. Use your oldest material first to avoid accumulating product with excessive age.

How many balloons will a bottle treat?


Balloon Size SUPER
HI-FLOAT
96 oz.
SUPER
HI-FLOAT
24 oz.
ULTRA
HI-FLOAT
96 oz.
ULTRA
HI-FLOAT
24 oz.
ULTRA
HI-FLOAT
pint
11 inches 405 101 567 141 100
14 inches 217 54 405 101 67
16 inches 120 30 216 54 36


Balloon Size Amount of SUPER HI-FLOAT Amount of ULTRA HI-FLOAT
24 inches 2 strokes with yellow clip 2 strokes with blue clip
30 inches 3 strokes with green clip 3 strokes with yellow clip
36 inches 4 strokes with green clip 4 strokes with yellow clip
40 inches 5 strokes with green clip 5 strokes with yellow clip
48 inches 1 cup (add through funnel) 3/4 cup (add through funnel)
60 inches 2 cups (add through funnel) 1 1/2 cup (add through funnel)

For maximum floating life keep balloons in a place of low humidity the first several hours after inflation.


Does HI-FLOAT work on foil balloons?

No. Foil balloons are not buoyant enough and will not float when treated.
For very long floating life we recommend a 16-inch latex balloon treated with ULTRA HI-FLOAT.

Does freezing hurt HI-FLOAT?

Freezing does not affect the performance of HI-FLOAT or SUPER HI-FLOAT liquid.
Allow it to thaw for about a day at room temperature before using. If balloons are
to be taken outdoors in extremely cold weather (below 0°F or -18°C) use regular
HI-FLOAT instead of SUPER HI-FLOAT.

What causes a large percentage of balloons to sometimes burst?

Sometimes, for no apparent reason, several balloons begin bursting.
This may be caused by static electricity brought about by changing weather conditions.
This happens with or without HI-FLOAT.
Try spraying “Static Guard” around your work area to reduce balloon loss.

The HI-FLOAT Balloon Transport Bag

* Specially ventilated to allow balloons treated with HI-FLOAT to dry properly. Will not significantly reduce the floating time of latex balloons.

* A great way to easily transport arrangements and to minimize tangling.

* Will prevent any "splatter" or mess should a HI-FLOAT treated balloon burst before drying.

* HI-FLOAT cleaning instructions printed right on the bag.

 
       
      All photographs and copy on this website are protected under copyright statutes.
Copyright © Chuck’s House of Magic, Inc. All rights reserved.
Not to be copied without permission.